In this assignment you'll build a key/value storage system that "shards," or partitions, the keys over a set of replica groups. A shard is a subset of the key/value pairs; for example, all the keys starting with "a" might be one shard, all the keys starting with "b" another, etc. The reason for sharding is performance. Each replica group handles puts and gets for just a few of the shards, and the groups operate in parallel; thus total system throughput (puts and gets per unit time) increases in proportion to the number of groups.
Your sharded key/value store will have two main components. First, a set of replica groups. Each replica group is responsible for a subset of the shards. A replica consists of a handful of servers that use Paxos to replicate the group's shard. The second component is the "shard master". The shard master decides which replica group should serve each shard; this information is called the configuration. The configuration changes over time. Clients consult the shard master in order to find the replica group for a key, and replica groups consult the master in order to find out what shards to serve. There is a single shard master for the whole system, implemented as a fault-tolerant service using Paxos.
A sharded storage system must be able to shift shards among replica groups. One reason is that some groups may become more loaded than others, so that shards need to be moved to balance the load. Another reason is that replica groups may join and leave the system: new replica groups may be added to increase capacity, or existing replica groups may be taken offline for repair or retirement.
The main challenge in this assignment will be handling reconfiguration in the replica groups. Within a single replica group, all group members must agree on when a reconfiguration occurs relative to client Put/Append/Get requests. For example, a Put may arrive at about the same time as a reconfiguration that causes the replica group to stop being responsible for the shard holding the Put's key. All replicas in the group must agree on whether the Put occurred before or after the reconfiguration. If before, the Put should take effect and the new owner of the shard will see its effect; if after, the Put won't take effect and client must re-try at the new owner. The recommended approach is to have each replica group use Paxos to log not just the sequence of Puts, Appends, and Gets, but also the sequence of reconfigurations.
Reconfiguration also requires interaction among the replica groups. For example, in configuration 10, group G1 may be responsible for shard S1. In configuration 11, group G2 may be responsible for shard S1. During the reconfiguration from 10 to 11, G1 must send the contents of shard S1 (the key/value pairs) to G2.
You will need to ensure that at most one replica group is serving requests for each shard. Luckily it is reasonable to assume that each replica group is always available, because each group uses Paxos for replication and thus can tolerate some network and server failures. As a result, your design can rely on one group to actively hand off responsibility to another group during reconfiguration. This is simpler than the situation in primary/backup replication (Assignment 2), where the old primary is often not reachable and may still think it is primary.
Only RPCs may be used for interaction between clients and servers, between different servers, and between different clients. For example, different instances of your server are not allowed to share Go variables or files.
You must write all the code you hand in for CS134, except for code that we give you as part of the assignment. You are not allowed to look at anyone else's solution, and you are not allowed to look at code from previous years. You may discuss assignment clarifications with other students, but you may not look at or copy each others' code or discuss specific solutions. Please do not publish your code or make it available to future CS134 students -- for example, please do not make your code visible on github.
We have added the files needed for assignment 4 in the
our public skeleton repository.
Similar to assignment 3, you only need to pull these
new files once per team. Assuming that you have correctly
added the public remote repository as described
in assignment 3, you should be able to easily pull the skeleton
code for this assignment using the following commands:
$ cd ${TEAM_NAME}
$ git pull public master
$ git push origin master
Assuming that you are in ${TEAM_NAME} directory, proceed to running the code:
$ export GOPATH=$(pwd)
$ cd src/shardmaster
$ go test
Test: Basic leave/join ...
--- FAIL: TestBasic (0.01s)
test_test.go:38: wanted 1 groups, got 0
Test: Concurrent leave/join, failure ...
--- FAIL: TestUnreliable (0.01s)
test_test.go:38: wanted 20 groups, got 0
Test: Query() returns latest configuration ...
--- FAIL: TestFreshQuery (0.01s)
test_test.go:367: Query(-1) produced a stale configuration
FAIL
Ignore the huge number of "has wrong number of inputs" and "type Paxos has no exported methods" errors.
First you will implement the shard master, in shardmaster/server.go. When you are done, you should pass all the tests in the shardmaster directory (after ignoring Go's many complaints):
$ cd src/shardmaster
$ go test
Test: Basic leave/join ...
... Passed
Test: Historical queries ...
... Passed
Test: Move ...
... Passed
Test: Concurrent leave/join ...
... Passed
Test: Min advances after joins ...
... Passed
Test: Minimal transfers after joins ...
... Passed
Test: Minimal transfers after leaves ...
... Passed
Test: Concurrent leave/join, failure ...
... Passed
Test: Query() returns latest configuration ...
... Passed
PASS
ok shardmaster 2.102s
The shardmaster manages a sequence of numbered configurations. Each configuration describes a set of replica groups and an assignment of shards to replica groups. Whenever this assignment needs to change, the shard master creates a new configuration with the new assignment. Key/value clients and servers contact the shardmaster when they want to know the current (or a past) configuration.
Your implementation must support the RPC interface described in shardmaster/common.go, which consists of Join, Leave, Move, and Query RPCs. You should not change common.go or client.go.
You don't need to implement duplicate client request detection for RPCs to the shard master that might fail or repeat due to network issues. A real system would need to do so, but these assignments don't require it. You'll still need to deal with clients sending multiple Joins or Leaves to the shardmaster.
You do need to detect duplicate client RPCs to the shardkv service in Part B. Please make sure that your scheme for duplicate detection frees server memory quickly, for example by having the client tell the servers which RPCs it has heard a reply for. It's OK to piggyback this information on the next client request.
The Join RPC's arguments are a unique non-zero replica group identifier (GID) and an array of server ports. The shardmaster should react by creating a new configuration that includes the new replica group. The new configuration should divide the shards as evenly as possible among the groups, and should move as few shards as possible to achieve that goal.
The Leave RPC's arguments are the GID of a previously joined group. The shardmaster should create a new configuration that does not include the group, and that assigns the group's shards to the remaining groups. The new configuration should divide the shards as evenly as possible among the groups, and should move as few shards as possible to achieve that goal.
The Move RPC's arguments are a shard number and a GID. The shardmaster should create a new configuration in which the shard is assigned to the group. The main purpose of Move is to allow us to test your code, but it might also be useful to fine-tune load balance if some shards are more popular than others or some replica groups are slower than the others. A Join or Leave following a Move will likely un-do the Move, since Join and Leave re-balance.
The Query RPC's argument is a configuration number. The shardmaster replies with the configuration that has that number. If the number is -1 or bigger than the highest known configuration number, the shardmaster should reply with the latest configuration. The result of Query(-1) should reflect every Join, Leave, or Move that completed before the Query(-1) RPC was sent.
The very first configuration should be numbered zero. It should contain no groups, and all shards should be assigned to GID zero (an invalid GID). The next configuration (created in response to a Join RPC) should be numbered 1, etc. There will usually be significantly more shards than groups (i.e., each group will serve more than one shard), so that the load can be shifted at a fairly fine granularity.
Your shardmaster must be fault-tolerant, using your Paxos library from assignment 3.
Hint: Start with a stripped-down copy of your kvpaxos server.
Hint: Go maps are references. If you assign one variable of type map to another, both variables refer to the same map. Thus if you want to create a new Config based on a previous one, you need to create a new map object (with make()) and copy the keys and values individually.
Now you will build shardkv, a sharded fault-tolerant key/value storage system. You will modify shardkv/client.go, shardkv/common.go, and shardkv/server.go.
Each shardkv server will operate as part of a replica group. Each replica group will serve Get/Put/Append operations for some of the key-space shards. Use key2shard() in client.go to find which shard a key belongs to. Multiple replica groups will cooperate to serve the complete set of shards. A single instance of the shardmaster service will assign shards to replica groups. When this assignment changes, replica groups will have to hand off shards to each other.
Your storage system must provide sequential consistency to applications that use its client interface. That is, completed application calls to the Clerk.Get(), Clerk.Put(), and Clerk.Append() methods in shardkv/client.go must appear to have affected all replicas in the same order. A Clerk.Get() should see the value written by the most recent Put/Append to the same key. This will get tricky when Gets and Puts arrive at about the same time as configuration changes.
You are allowed to assume that a majority of servers in each Paxos replica group are alive and can talk to each other, can talk to a majority of the shardmaster servers, and can talk to a majority of each other replica group. Your implementation must operate (serve requests and be able to re-configure as needed) if a minority of servers in some replica group(s) are dead, temporarily unavailable, or slow.
We supply you with client.go code that sends each RPC to the replica group responsible for the RPC's key. It re-tries if the replica group says it is not responsible for the key; in that case, the client code asks the shard master for the latest configuration and tries again. You'll have to modify client.go as part of your support for dealing with duplicate client RPCs, much as in the kvpaxos lab.
When you're done, your code should pass the shardkv tests:
$ cd src/shardkv
$ go test
Test: Basic Join/Leave ...
... Passed
Test: Shards really move ...
... Passed
Test: Reconfiguration with some dead replicas ...
... Passed
Test: Concurrent Put/Get/Move ...
... Passed
Test: Concurrent Put/Get/Move (unreliable) ...
... Passed
PASS
ok shardkv 62.350s
Your server should not automatically call the shard master's Join() handler. The tester will call Join() when appropriate.
The two Concurrent test cases above test several clients sending Append and Get operations to different shard groups concurrently while also periodically asking the shard master to move shards between groups. To pass these test cases you must design a correct protocol for handling concurrent operations in the presence of configuration changes. The second concurrent test case is the same as the first one, though the test code drops requests and responses randomly.
Hint: Your server will need to periodically check with the shardmaster to see if there's a new configuration; do this in tick().
Hint: You should have a function whose job is to examine recent entries in the Paxos log and apply them to the state of the shardkv server. Don't directly update the stored key/value database in the Put/Append/Get handlers; instead, attempt to append a Put, Append, or Get operation to the Paxos log, and then call your log-reading function to find out what happened (e.g., perhaps a reconfiguration was entered in the log just before the Put/Append/Get).
Hint: Your server should respond with an ErrWrongGroup error to a client RPC with a key that the server isn't responsible for (i.e. for a key whose shard is not assigned to the server's group). Make sure your Get/Put/Append handlers make this decision correctly in the face of a concurrent re-configuration.
Hint: Process re-configurations one at a time, in order.
Hint: During re-configuration, replica groups will have to send each other the keys and values for some shards.
Hint: You must call px.Done() to let Paxos free old parts of its log.
Hint: When the test fails, check for gob error (e.g. "rpc: writing response: gob: type not registered for interface ...") in the log because go doesn't consider the error fatal, although it is fatal for this assignment.
Hint: Be careful about implementing at-most-once semantic for RPC. When a server sends shards to another, the server needs to send the clients state as well. Think about how the receiver of the shards should update its own clients state. Is it ok for the receiver to replace its clients state with the received one?
Hint: Think about how should the shardkv client and server deal with ErrWrongGroup. Should the client change the sequence number if it receives ErrWrongGroup? Should the server update the client state if it returns ErrWrongGroup when executing a Get/Put request?
Hint: After a server has moved to a new view, it can leave the shards that it is not owning in the new view undeleted. This will simplify the server implementation.
Hint: Think about when it is ok for a server to give shards to the other server during view change.
To submit the assignment, please push your final code into your team's repository. Then fill out the submission form to turn in your assignment.
To submit the assignment, please push your final code into your team's repository. Please make sure to comment out all debugging statements/logs prior to submitting. Then fill out the submission form to turn in your assignment. You may use any number of your group's remaining late days (up to 4) for this assignment. To use a late day, remember to contact your TA ahead of time (i.e., before 10PM PT on the assignment due date). Each used late day pushes the due date back by exactly 24 hours; for example, if you use 1 late day, the assignment will be due Wednesday, June 3rd at 10:00PM PT. In any case, we will evaluate the code in your last submission prior to the deadline (either the original one on 5/28, or an updated one based on the number of late days you use).