For this assignment you will need a Seeed Studio BeagleBone Green Wireless Development Board. You may wish to get the higher-priced Seeed Studio BeagleBone Green Wireless IOT Kit, as this is a superset of the basic unit needed for 35L, and is used by CS 111 this quarter (and likely in later quarters, though this is not guaranteed). These units are available from Seeed, Amazon, Digi-Key, Mouser Electronics, Verical, and other sources.
When you initially set up your host in the lab, you will be running an operating system, and will be able to connect to the outside world, but you won't be able to connect to the hosts of the other students in the class except in trivial ways. What you'd like to do is to be able to run processes on the other students' hosts. For example, you'd like to be able to log into a neighbor's host, and run a program there that displays on your host.
To do that, you need to set up an account on your neighbor's host, and vice versa so that your neighbor can log into your host and do the same. Unfortunately, the obvious ways to do that involve an initial step that exchanges passwords over the Internet in the clear. We'd like to avoid that.
In this laboratory, the class will divide into teams. Your team will assume that the other teams have all tapped the network connection and can observe the contents of all the packets going back and forth among all your team's computers. Your job is to set up your computers so that you can log into each other's hosts, without letting the other teams into your hosts.
Do not try to actually break into the other team's hosts; this is an exercise in defense, not offense!
Use OpenSSH to establish trusted connections among your teams' hosts. You want to make your logins convenient, so you should use ssh-agent on your host to manage authentication. That is, you should be able to log out of your host (dropping all your connections to the outside world), then log back in, type your passphrase once to ssh-agent, and then be able to use ssh to connect to any of your colleagues' hosts, without typing any passwords or passphrases.
You should also use port forwarding so that you can run a command on a remote host that displays on your host. For example, you should be able to log into a remote host, type the command xterm, and get a shell window on your host. Check whether ssh -X and ssh -Y differ in behavior when you use port forwarding.
Keep a log of every step you personally took during the laboratory to configure your or your team members' hosts, and what the results of the step were. The idea behind recording your steps is that you should be able to reproduce your work later, if need be.
On the SEASnet GNU/Linux servers, use GNU Privacy Guard's shell commands to create a key pair. Although GPG version 2 is recommended, you can use version 1 if you prefer. Export the public key, in ASCII format, into a file hw-pubkey.asc. Use this key to create a detached signature for your submission so that the commands described below can successfully verify it.
If you are creating a key pair on the SEASnet GNU/Linux servers, you may exhaust its entropy pool as described in Launchpad bug 706011. The symptom will be a diagnostic saying "It is a good idea to perform some other action (type on the keyboard, move the mouse, utilize the disks) during the prime generation; this gives the random number generator a better chance to gain enough entropy." Since you can't use the keyboard or mouse on the SEASnet servers, you'll have to use the disks, for example, by using the find command to copy every readable file to /dev/null; this is something that you can do in another session that is logged into the same machine. Please remember to interrupt the find once the key pair is generated, so that you don't tie up the server unnecessarily.
Briefly answer the following questions.
Submit five files, as follows:
The following shell commands should work:
mkdir -m go-rwx .gnupg gpg2 --homedir .gnupg --import hw-pubkey.asc gpg2 --homedir .gnupg --verify eeprom.sig eeprom awk '200 < length' log.txt hw.txt
The gpg2 --verify command should say "Good signature". The last awk command should output nothing.